1～3 件を表示 ／ 全 3 件
What is a Nureto skeleton urethane acrylate resin?
Nureto skeleton urethane acrylate resin is a material that combines high toughness and flexibility. Additionally, it has excellent scratch resistance and elastic recovery, making it difficult to damage. It is also a non-yellowing type and has superior tensile strength.
![[Newly Developed Product] UV-Curable Epoxy Acrylate TRU-0153K](https://image.mono.ipros.com/public/product/image/2074363/IPROS9346357538460208094.png?w=280&h=280)
UV-curable urethane acrylate that balances transparency and durability. It has low viscosity and low hardness, providing flexibility and is effective for stress relief.
"TRU-0153K" is a one-component UV-curable urethane acrylate resin developed for the coating of electronic components. It can be cured in a short time using metal halide lamp irradiation (1,500 mJ/cm²), demonstrating high productivity even in mass production processes. This product has a low viscosity of 1,300 mPa·s and low hardness (Shore A35), providing flexible properties that relieve stress and prevent crack formation. Furthermore, it shows no change in hardness even after high-temperature testing at 150°C for 1,000 hours and 1,000 cycles of thermal cycling between -40°C and 150°C, exhibiting excellent moisture and heat resistance and durability. It balances high insulation and flexibility. 【Features】 ■ One-component UV-curable urethane acrylate resin ■ Short curing time (UV: 1,500 mJ/cm²) ■ Low viscosity and low hardness (Shore A35) with flexibility, effective for stress relief ■ No change in hardness after 150°C for 1,000 hours and -40°C to 150°C for 1,000 cycles *For more details, the product specification sheet is available for download as a PDF below, or please contact us. *Samples are also available, so please contact us if needed.
One-component UV-curable urethane acrylate resin. Suitable for substrate coating. Excellent workability with low viscosity of 550 mPa·s and quick curing for mass production.
The 『TRU-0500K2』 is a one-component UV-curable urethane acrylate resin developed for moisture-proof coating applications on electronic circuit boards. Its one-component design, which requires no mixing, makes it easy to handle, and it allows for rapid curing through UV irradiation (1,500mJ/cm²), making it suitable for energy-efficient and effective mass production processes. This product features a low viscosity design of 550mPa·s (25°C), providing excellent workability and making it easy to coat complex part shapes and narrow areas. The cured material has a Shore D hardness of 58, balancing flexibility and strength. Additionally, it boasts excellent insulation properties with a dielectric breakdown strength of 30kV/mm and a volume resistivity of 2×10^15Ω·cm, supporting the long-term reliability of electronic devices. The appearance is transparent, allowing for use without compromising the aesthetics of circuit boards and electronic components. 【Features】 ■ One-component UV-curable urethane acrylate resin ■ Low viscosity (550mPa·s) for good workability ■ High moisture resistance (water absorption rate of 0.3%), ensuring long-term reliability *For more details, a product specification sheet is available for download as a PDF below, or please contact us. *Samples are also available, so please reach out if needed.
